diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 467fe25..8e734fd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -361,6 +361,36 @@
 	  Stack top address which is used in FspInit after DRAM is ready and
 	  CAR is disabled.
 
+config MAX_CPUS
+        int "Maximum number of CPUs permitted"
+        default 4
+        help
+          When using multi-CPU chips it is possible for U-Boot to start up
+          more than one CPU. The stack memory used by all of these CPUs is
+          pre-allocated so at present U-Boot wants to know the maximum
+          number of CPUs that may be present. Set this to at least as high
+          as the number of CPUs in your system (it uses about 4KB of RAM for
+          each CPU).
+
+config SMP
+	bool "Enable Symmetric Multiprocessing"
+	default n
+	help
+	  Enable use of more than one CPU in U-Boot and the Operating System
+	  when loaded. Each CPU will be started up and information can be
+	  obtained using the 'cpu' command. If this option is disabled, then
+	  only one CPU will be enabled regardless of the number of CPUs
+	  available.
+
+config AP_STACK_SIZE
+	hex
+	default 0x1000
+	help
+	  Each additional CPU started by U-Boot requires its own stack. This
+	  option sets the stack size used by each CPU and directly affects
+	  the memory used by this initialisation process. Typically 4KB is
+	  enough space.
+
 config TSC_CALIBRATION_BYPASS
 	bool "Bypass Time-Stamp Counter (TSC) calibration"
 	default n
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 6ded0a7..043bea2 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -19,6 +19,8 @@
 obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-y += lapic.o
+obj-$(CONFIG_SMP) += mp_init.o
 obj-y += mtrr.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_SMP) += sipi_vector.o
 obj-y += turbo.o
diff --git a/arch/x86/cpu/ivybridge/car.S b/arch/x86/cpu/ivybridge/car.S
index 9441666..407e451 100644
--- a/arch/x86/cpu/ivybridge/car.S
+++ b/arch/x86/cpu/ivybridge/car.S
@@ -15,6 +15,7 @@
 #include <asm/msr-index.h>
 #include <asm/mtrr.h>
 #include <asm/post.h>
+#include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include <asm/arch/microcode.h>
 
diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c
index 11dc625..8b08c40 100644
--- a/arch/x86/cpu/ivybridge/model_206ax.c
+++ b/arch/x86/cpu/ivybridge/model_206ax.c
@@ -435,8 +435,8 @@
 
 		debug("CPU: %u has core %u\n", cpu->apic_id, new_cpu->apic_id);
 
-#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
-		/* Start the new cpu */
+#if 0 && CONFIG_SMP && CONFIG_MAX_CPUS > 1
+		/* TODO(sjg@chromium.org): Start the new cpu */
 		if (!start_cpu(new_cpu)) {
 			/* Record the error in cpu? */
 			printk(BIOS_ERR, "CPU %u would not start!\n",
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
new file mode 100644
index 0000000..ac5753a
--- /dev/null
+++ b/arch/x86/cpu/mp_init.c
@@ -0,0 +1,496 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Based on code from the coreboot file of the same name
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/interrupt.h>
+#include <asm/lapic.h>
+#include <asm/mp.h>
+#include <asm/mtrr.h>
+#include <asm/sipi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <linux/linkage.h>
+
+/* This also needs to match the sipi.S assembly code for saved MSR encoding */
+struct saved_msr {
+	uint32_t index;
+	uint32_t lo;
+	uint32_t hi;
+} __packed;
+
+
+struct mp_flight_plan {
+	int num_records;
+	struct mp_flight_record *records;
+};
+
+static struct mp_flight_plan mp_info;
+
+struct cpu_map {
+	struct udevice *dev;
+	int apic_id;
+	int err_code;
+};
+
+static inline void barrier_wait(atomic_t *b)
+{
+	while (atomic_read(b) == 0)
+		asm("pause");
+	mfence();
+}
+
+static inline void release_barrier(atomic_t *b)
+{
+	mfence();
+	atomic_set(b, 1);
+}
+
+/* Returns 1 if timeout waiting for APs. 0 if target APs found */
+static int wait_for_aps(atomic_t *val, int target, int total_delay,
+			int delay_step)
+{
+	int timeout = 0;
+	int delayed = 0;
+
+	while (atomic_read(val) != target) {
+		udelay(delay_step);
+		delayed += delay_step;
+		if (delayed >= total_delay) {
+			timeout = 1;
+			break;
+		}
+	}
+
+	return timeout;
+}
+
+static void ap_do_flight_plan(struct udevice *cpu)
+{
+	int i;
+
+	for (i = 0; i < mp_info.num_records; i++) {
+		struct mp_flight_record *rec = &mp_info.records[i];
+
+		atomic_inc(&rec->cpus_entered);
+		barrier_wait(&rec->barrier);
+
+		if (rec->ap_call != NULL)
+			rec->ap_call(cpu, rec->ap_arg);
+	}
+}
+
+static int find_cpu_by_apid_id(int apic_id, struct udevice **devp)
+{
+	struct udevice *dev;
+
+	*devp = NULL;
+	for (uclass_find_first_device(UCLASS_CPU, &dev);
+	     dev;
+	     uclass_find_next_device(&dev)) {
+		struct cpu_platdata *plat = dev_get_parent_platdata(dev);
+
+		if (plat->cpu_id == apic_id) {
+			*devp = dev;
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/*
+ * By the time APs call ap_init() caching has been setup, and microcode has
+ * been loaded
+ */
+static void ap_init(unsigned int cpu_index)
+{
+	struct udevice *dev;
+	int apic_id;
+	int ret;
+
+	/* Ensure the local apic is enabled */
+	enable_lapic();
+
+	apic_id = lapicid();
+	ret = find_cpu_by_apid_id(apic_id, &dev);
+	if (ret) {
+		debug("Unknown CPU apic_id %x\n", apic_id);
+		goto done;
+	}
+
+	debug("AP: slot %d apic_id %x, dev %s\n", cpu_index, apic_id,
+	      dev ? dev->name : "(apic_id not found)");
+
+	/* Walk the flight plan */
+	ap_do_flight_plan(dev);
+
+	/* Park the AP */
+	debug("parking\n");
+done:
+	stop_this_cpu();
+}
+
+static const unsigned int fixed_mtrrs[NUM_FIXED_MTRRS] = {
+	MTRR_FIX_64K_00000_MSR, MTRR_FIX_16K_80000_MSR, MTRR_FIX_16K_A0000_MSR,
+	MTRR_FIX_4K_C0000_MSR, MTRR_FIX_4K_C8000_MSR, MTRR_FIX_4K_D0000_MSR,
+	MTRR_FIX_4K_D8000_MSR, MTRR_FIX_4K_E0000_MSR, MTRR_FIX_4K_E8000_MSR,
+	MTRR_FIX_4K_F0000_MSR, MTRR_FIX_4K_F8000_MSR,
+};
+
+static inline struct saved_msr *save_msr(int index, struct saved_msr *entry)
+{
+	msr_t msr;
+
+	msr = msr_read(index);
+	entry->index = index;
+	entry->lo = msr.lo;
+	entry->hi = msr.hi;
+
+	/* Return the next entry */
+	entry++;
+	return entry;
+}
+
+static int save_bsp_msrs(char *start, int size)
+{
+	int msr_count;
+	int num_var_mtrrs;
+	struct saved_msr *msr_entry;
+	int i;
+	msr_t msr;
+
+	/* Determine number of MTRRs need to be saved */
+	msr = msr_read(MTRR_CAP_MSR);
+	num_var_mtrrs = msr.lo & 0xff;
+
+	/* 2 * num_var_mtrrs for base and mask. +1 for IA32_MTRR_DEF_TYPE */
+	msr_count = 2 * num_var_mtrrs + NUM_FIXED_MTRRS + 1;
+
+	if ((msr_count * sizeof(struct saved_msr)) > size) {
+		printf("Cannot mirror all %d msrs.\n", msr_count);
+		return -ENOSPC;
+	}
+
+	msr_entry = (void *)start;
+	for (i = 0; i < NUM_FIXED_MTRRS; i++)
+		msr_entry = save_msr(fixed_mtrrs[i], msr_entry);
+
+	for (i = 0; i < num_var_mtrrs; i++) {
+		msr_entry = save_msr(MTRR_PHYS_BASE_MSR(i), msr_entry);
+		msr_entry = save_msr(MTRR_PHYS_MASK_MSR(i), msr_entry);
+	}
+
+	msr_entry = save_msr(MTRR_DEF_TYPE_MSR, msr_entry);
+
+	return msr_count;
+}
+
+static int load_sipi_vector(atomic_t **ap_countp)
+{
+	struct sipi_params_16bit *params16;
+	struct sipi_params *params;
+	static char msr_save[512];
+	char *stack;
+	ulong addr;
+	int code_len;
+	int size;
+	int ret;
+
+	/* Copy in the code */
+	code_len = ap_start16_code_end - ap_start16;
+	debug("Copying SIPI code to %x: %d bytes\n", AP_DEFAULT_BASE,
+	      code_len);
+	memcpy((void *)AP_DEFAULT_BASE, ap_start16, code_len);
+
+	addr = AP_DEFAULT_BASE + (ulong)sipi_params_16bit - (ulong)ap_start16;
+	params16 = (struct sipi_params_16bit *)addr;
+	params16->ap_start = (uint32_t)ap_start;
+	params16->gdt = (uint32_t)gd->arch.gdt;
+	params16->gdt_limit = X86_GDT_SIZE - 1;
+	debug("gdt = %x, gdt_limit = %x\n", params16->gdt, params16->gdt_limit);
+
+	params = (struct sipi_params *)sipi_params;
+	debug("SIPI 32-bit params at %p\n", params);
+	params->idt_ptr = (uint32_t)x86_get_idt();
+
+	params->stack_size = CONFIG_AP_STACK_SIZE;
+	size = params->stack_size * CONFIG_MAX_CPUS;
+	stack = memalign(size, 4096);
+	if (!stack)
+		return -ENOMEM;
+	params->stack_top = (u32)(stack + size);
+
+	params->microcode_ptr = 0;
+	params->msr_table_ptr = (u32)msr_save;
+	ret = save_bsp_msrs(msr_save, sizeof(msr_save));
+	if (ret < 0)
+		return ret;
+	params->msr_count = ret;
+
+	params->c_handler = (uint32_t)&ap_init;
+
+	*ap_countp = &params->ap_count;
+	atomic_set(*ap_countp, 0);
+	debug("SIPI vector is ready\n");
+
+	return 0;
+}
+
+static int check_cpu_devices(int expected_cpus)
+{
+	int i;
+
+	for (i = 0; i < expected_cpus; i++) {
+		struct udevice *dev;
+		int ret;
+
+		ret = uclass_find_device(UCLASS_CPU, i, &dev);
+		if (ret) {
+			debug("Cannot find CPU %d in device tree\n", i);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/* Returns 1 for timeout. 0 on success */
+static int apic_wait_timeout(int total_delay, int delay_step)
+{
+	int total = 0;
+	int timeout = 0;
+
+	while (lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY) {
+		udelay(delay_step);
+		total += delay_step;
+		if (total >= total_delay) {
+			timeout = 1;
+			break;
+		}
+	}
+
+	return timeout;
+}
+
+static int start_aps(int ap_count, atomic_t *num_aps)
+{
+	int sipi_vector;
+	/* Max location is 4KiB below 1MiB */
+	const int max_vector_loc = ((1 << 20) - (1 << 12)) >> 12;
+
+	if (ap_count == 0)
+		return 0;
+
+	/* The vector is sent as a 4k aligned address in one byte */
+	sipi_vector = AP_DEFAULT_BASE >> 12;
+
+	if (sipi_vector > max_vector_loc) {
+		printf("SIPI vector too large! 0x%08x\n",
+		       sipi_vector);
+		return -1;
+	}
+
+	debug("Attempting to start %d APs\n", ap_count);
+
+	if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+		debug("Waiting for ICR not to be busy...");
+		if (apic_wait_timeout(1000, 50)) {
+			debug("timed out. Aborting.\n");
+			return -1;
+		} else {
+			debug("done.\n");
+		}
+	}
+
+	/* Send INIT IPI to all but self */
+	lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+	lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+			   LAPIC_DM_INIT);
+	debug("Waiting for 10ms after sending INIT.\n");
+	mdelay(10);
+
+	/* Send 1st SIPI */
+	if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+		debug("Waiting for ICR not to be busy...");
+		if (apic_wait_timeout(1000, 50)) {
+			debug("timed out. Aborting.\n");
+			return -1;
+		} else {
+			debug("done.\n");
+		}
+	}
+
+	lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+	lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+			   LAPIC_DM_STARTUP | sipi_vector);
+	debug("Waiting for 1st SIPI to complete...");
+	if (apic_wait_timeout(10000, 50)) {
+		debug("timed out.\n");
+		return -1;
+	} else {
+		debug("done.\n");
+	}
+
+	/* Wait for CPUs to check in up to 200 us */
+	wait_for_aps(num_aps, ap_count, 200, 15);
+
+	/* Send 2nd SIPI */
+	if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+		debug("Waiting for ICR not to be busy...");
+		if (apic_wait_timeout(1000, 50)) {
+			debug("timed out. Aborting.\n");
+			return -1;
+		} else {
+			debug("done.\n");
+		}
+	}
+
+	lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+	lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+			   LAPIC_DM_STARTUP | sipi_vector);
+	debug("Waiting for 2nd SIPI to complete...");
+	if (apic_wait_timeout(10000, 50)) {
+		debug("timed out.\n");
+		return -1;
+	} else {
+		debug("done.\n");
+	}
+
+	/* Wait for CPUs to check in */
+	if (wait_for_aps(num_aps, ap_count, 10000, 50)) {
+		debug("Not all APs checked in: %d/%d.\n",
+		      atomic_read(num_aps), ap_count);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params)
+{
+	int i;
+	int ret = 0;
+	const int timeout_us = 100000;
+	const int step_us = 100;
+	int num_aps = mp_params->num_cpus - 1;
+
+	for (i = 0; i < mp_params->num_records; i++) {
+		struct mp_flight_record *rec = &mp_params->flight_plan[i];
+
+		/* Wait for APs if the record is not released */
+		if (atomic_read(&rec->barrier) == 0) {
+			/* Wait for the APs to check in */
+			if (wait_for_aps(&rec->cpus_entered, num_aps,
+					 timeout_us, step_us)) {
+				debug("MP record %d timeout.\n", i);
+				ret = -1;
+			}
+		}
+
+		if (rec->bsp_call != NULL)
+			rec->bsp_call(cpu, rec->bsp_arg);
+
+		release_barrier(&rec->barrier);
+	}
+	return ret;
+}
+
+static int init_bsp(struct udevice **devp)
+{
+	char processor_name[CPU_MAX_NAME_LEN];
+	int apic_id;
+	int ret;
+
+	cpu_get_name(processor_name);
+	debug("CPU: %s.\n", processor_name);
+
+	enable_lapic();
+
+	apic_id = lapicid();
+	ret = find_cpu_by_apid_id(apic_id, devp);
+	if (ret) {
+		printf("Cannot find boot CPU, APIC ID %d\n", apic_id);
+		return ret;
+	}
+
+	return 0;
+}
+
+int mp_init(struct mp_params *p)
+{
+	int num_aps;
+	atomic_t *ap_count;
+	struct udevice *cpu;
+	int ret;
+
+	/* This will cause the CPUs devices to be bound */
+	struct uclass *uc;
+	ret = uclass_get(UCLASS_CPU, &uc);
+	if (ret)
+		return ret;
+
+	ret = init_bsp(&cpu);
+	if (ret) {
+		debug("Cannot init boot CPU: err=%d\n", ret);
+		return ret;
+	}
+
+	if (p == NULL || p->flight_plan == NULL || p->num_records < 1) {
+		printf("Invalid MP parameters\n");
+		return -1;
+	}
+
+	ret = check_cpu_devices(p->num_cpus);
+	if (ret)
+		debug("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n");
+
+	/* Copy needed parameters so that APs have a reference to the plan */
+	mp_info.num_records = p->num_records;
+	mp_info.records = p->flight_plan;
+
+	/* Load the SIPI vector */
+	ret = load_sipi_vector(&ap_count);
+	if (ap_count == NULL)
+		return -1;
+
+	/*
+	 * Make sure SIPI data hits RAM so the APs that come up will see
+	 * the startup code even if the caches are disabled
+	 */
+	wbinvd();
+
+	/* Start the APs providing number of APs and the cpus_entered field */
+	num_aps = p->num_cpus - 1;
+	ret = start_aps(num_aps, ap_count);
+	if (ret) {
+		mdelay(1000);
+		debug("%d/%d eventually checked in?\n", atomic_read(ap_count),
+		      num_aps);
+		return ret;
+	}
+
+	/* Walk the flight plan for the BSP */
+	ret = bsp_do_flight_plan(cpu, p);
+	if (ret) {
+		debug("CPU init failed: err=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int mp_init_cpu(struct udevice *cpu, void *unused)
+{
+	return device_probe(cpu);
+}
diff --git a/arch/x86/cpu/sipi_vector.S b/arch/x86/cpu/sipi_vector.S
new file mode 100644
index 0000000..bcef12c
--- /dev/null
+++ b/arch/x86/cpu/sipi_vector.S
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ * Taken from coreboot file of the same name
+ */
+
+/*
+ * The SIPI vector is responsible for initializing the APs in the sytem. It
+ * loads microcode, sets up MSRs, and enables caching before calling into
+ * C code
+ */
+
+#include <asm/global_data.h>
+#include <asm/msr-index.h>
+#include <asm/processor.h>
+#include <asm/processor-flags.h>
+#include <asm/sipi.h>
+
+#define CODE_SEG	(X86_GDT_ENTRY_32BIT_CS * X86_GDT_ENTRY_SIZE)
+#define DATA_SEG	(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE)
+
+/*
+ * First we have the 16-bit section. Every AP process starts here.
+ * The simple task is to load U-Boot's Global Descriptor Table (GDT) to allow
+ * U-Boot's 32-bit code to become visible, then jump to ap_start.
+ *
+ * Note that this code is copied to RAM below 1MB in mp_init.c, and runs from
+ * there, but the 32-bit code (ap_start and onwards) is part of U-Boot and
+ * is therefore relocated to the top of RAM with other U-Boot code. This
+ * means that for the 16-bit code we must write relocatable code, but for the
+ * rest, we can do what we like.
+ */
+.text
+.code16
+.globl ap_start16
+ap_start16:
+	cli
+	xorl	%eax, %eax
+	movl	%eax, %cr3		/* Invalidate TLB */
+
+	/* setup the data segment */
+	movw	%cs, %ax
+	movw	%ax, %ds
+
+	/* Use an address relative to the data segment for the GDT */
+	movl	$gdtaddr, %ebx
+	subl	$ap_start16, %ebx
+
+	data32 lgdt (%ebx)
+
+	movl	%cr0, %eax
+	andl	$(~(X86_CR0_PG | X86_CR0_AM | X86_CR0_WP | X86_CR0_NE | \
+		    X86_CR0_TS | X86_CR0_EM | X86_CR0_MP)), %eax
+	orl	$(X86_CR0_NW | X86_CR0_CD | X86_CR0_PE), %eax
+	movl	%eax, %cr0
+
+	movl	$ap_start_jmp, %eax
+	subl	$ap_start16, %eax
+	movw	%ax, %bp
+
+	/* Jump to ap_start within U-Boot */
+data32 cs	ljmp	*(%bp)
+
+	.align	4
+.globl sipi_params_16bit
+sipi_params_16bit:
+	/* 48-bit far pointer */
+ap_start_jmp:
+	.long	0		/* offset set to ap_start by U-Boot */
+	.word	CODE_SEG	/* segment */
+
+	.word	0		/* padding */
+gdtaddr:
+	.word	0 /* limit */
+	.long	0 /* table */
+	.word	0 /* unused */
+
+.globl ap_start16_code_end
+ap_start16_code_end:
+
+/*
+ * Set up the special 'fs' segment for global_data. Then jump to ap_continue
+ * to set up the AP.
+ */
+.globl ap_start
+ap_start:
+	.code32
+	movw	$DATA_SEG, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %ss
+	movw	%ax, %gs
+
+	movw	$(X86_GDT_ENTRY_32BIT_FS * X86_GDT_ENTRY_SIZE), %ax
+	movw	%ax, %fs
+
+	/* Load the Interrupt descriptor table */
+	mov	idt_ptr, %ebx
+	lidt	(%ebx)
+
+	/* Obtain cpu number */
+	movl	ap_count, %eax
+1:
+	movl	%eax, %ecx
+	inc	%ecx
+	lock cmpxchg %ecx, ap_count
+	jnz	1b
+
+	/* Setup stacks for each CPU */
+	movl	stack_size, %eax
+	mul	%ecx
+	movl	stack_top, %edx
+	subl	%eax, %edx
+	mov	%edx, %esp
+	/* Save cpu number */
+	mov	%ecx, %esi
+
+	/* Determine if one should check microcode versions */
+	mov	microcode_ptr, %edi
+	test	%edi, %edi
+	jz	microcode_done /* Bypass if no microde exists */
+
+	/* Get the Microcode version */
+	mov	$1, %eax
+	cpuid
+	mov	$MSR_IA32_UCODE_REV, %ecx
+	rdmsr
+	/* If something already loaded skip loading again */
+	test	%edx, %edx
+	jnz	microcode_done
+
+	/* Determine if parallel microcode loading is allowed */
+	cmp	$0xffffffff, microcode_lock
+	je	load_microcode
+
+	/* Protect microcode loading */
+lock_microcode:
+	lock bts $0, microcode_lock
+	jc	lock_microcode
+
+load_microcode:
+	/* Load new microcode */
+	mov	$MSR_IA32_UCODE_WRITE, %ecx
+	xor	%edx, %edx
+	mov	%edi, %eax
+	/*
+	 * The microcode pointer is passed in pointing to the header. Adjust
+	 * pointer to reflect the payload (header size is 48 bytes)
+	 */
+	add	$UCODE_HEADER_LEN, %eax
+	pusha
+	wrmsr
+	popa
+
+	/* Unconditionally unlock microcode loading */
+	cmp	$0xffffffff, microcode_lock
+	je	microcode_done
+
+	xor	%eax, %eax
+	mov	%eax, microcode_lock
+
+microcode_done:
+	/*
+	 * Load MSRs. Each entry in the table consists of:
+	 * 0: index,
+	 * 4: value[31:0]
+	 * 8: value[63:32]
+	 * See struct saved_msr in mp_init.c.
+	 */
+	mov	msr_table_ptr, %edi
+	mov	msr_count, %ebx
+	test	%ebx, %ebx
+	jz	1f
+load_msr:
+	mov	(%edi), %ecx
+	mov	4(%edi), %eax
+	mov	8(%edi), %edx
+	wrmsr
+	add	$12, %edi
+	dec	%ebx
+	jnz	load_msr
+
+1:
+	/* Enable caching */
+	mov	%cr0, %eax
+	andl	$(~(X86_CR0_CD | X86_CR0_NW)), %eax
+	mov	%eax, %cr0
+
+	/* c_handler(cpu_num) */
+	movl	%esi, %eax	/* cpu_num */
+	mov	c_handler, %eax
+	call	*%eax
+
+	.align	4
+.globl	sipi_params
+sipi_params:
+idt_ptr:
+	.long 0
+stack_top:
+	.long 0
+stack_size:
+	.long 0
+microcode_lock:
+	.long 0
+microcode_ptr:
+	.long 0
+msr_table_ptr:
+	.long 0
+msr_count:
+	.long 0
+c_handler:
+	.long 0
+ap_count:
+	.long 0
diff --git a/arch/x86/include/asm/arch-ivybridge/microcode.h b/arch/x86/include/asm/arch-ivybridge/microcode.h
index b868283..67f32cc 100644
--- a/arch/x86/include/asm/arch-ivybridge/microcode.h
+++ b/arch/x86/include/asm/arch-ivybridge/microcode.h
@@ -7,9 +7,6 @@
 #ifndef __ASM_ARCH_MICROCODE_H
 #define __ASM_ARCH_MICROCODE_H
 
-/* Length of the public header on Intel microcode blobs */
-#define UCODE_HEADER_LEN	0x30
-
 #ifndef __ASSEMBLY__
 
 /**
diff --git a/arch/x86/include/asm/mp.h b/arch/x86/include/asm/mp.h
new file mode 100644
index 0000000..c0930fd
--- /dev/null
+++ b/arch/x86/include/asm/mp.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ * Taken from coreboot file of the same name
+ */
+
+#ifndef _X86_MP_H_
+#define _X86_MP_H_
+
+#include <asm/atomic.h>
+
+typedef int (*mp_callback_t)(struct udevice *cpu, void *arg);
+
+/*
+ * A mp_flight_record details a sequence of calls for the APs to perform
+ * along with the BSP to coordinate sequencing. Each flight record either
+ * provides a barrier for each AP before calling the callback or the APs
+ * are allowed to perform the callback without waiting. Regardless, each
+ * record has the cpus_entered field incremented for each record. When
+ * the BSP observes that the cpus_entered matches the number of APs
+ * the bsp_call is called with bsp_arg and upon returning releases the
+ * barrier allowing the APs to make further progress.
+ *
+ * Note that ap_call() and bsp_call() can be NULL. In the NULL case the
+ * callback will just not be called.
+ */
+struct mp_flight_record {
+	atomic_t barrier;
+	atomic_t cpus_entered;
+	mp_callback_t ap_call;
+	void *ap_arg;
+	mp_callback_t bsp_call;
+	void *bsp_arg;
+} __attribute__((aligned(ARCH_DMA_MINALIGN)));
+
+#define MP_FLIGHT_RECORD(barrier_, ap_func_, ap_arg_, bsp_func_, bsp_arg_) \
+	{							\
+		.barrier = ATOMIC_INIT(barrier_),		\
+		.cpus_entered = ATOMIC_INIT(0),			\
+		.ap_call = ap_func_,				\
+		.ap_arg = ap_arg_,				\
+		.bsp_call = bsp_func_,				\
+		.bsp_arg = bsp_arg_,				\
+	}
+
+#define MP_FR_BLOCK_APS(ap_func, ap_arg, bsp_func, bsp_arg) \
+	MP_FLIGHT_RECORD(0, ap_func, ap_arg, bsp_func, bsp_arg)
+
+#define MP_FR_NOBLOCK_APS(ap_func, ap_arg, bsp_func, bsp_arg) \
+	MP_FLIGHT_RECORD(1, ap_func, ap_arg, bsp_func, bsp_arg)
+
+/*
+ * The mp_params structure provides the arguments to the mp subsystem
+ * for bringing up APs.
+ *
+ * At present this is overkill for U-Boot, but it may make it easier to add
+ * SMM support.
+ */
+struct mp_params {
+	int num_cpus; /* Total cpus include BSP */
+	int parallel_microcode_load;
+	const void *microcode_pointer;
+	/* Flight plan  for APs and BSP */
+	struct mp_flight_record *flight_plan;
+	int num_records;
+};
+
+/*
+ * mp_init() will set up the SIPI vector and bring up the APs according to
+ * mp_params. Each flight record will be executed according to the plan. Note
+ * that the MP infrastructure uses SMM default area without saving it. It's
+ * up to the chipset or mainboard to either e820 reserve this area or save this
+ * region prior to calling mp_init() and restoring it after mp_init returns.
+ *
+ * At the time mp_init() is called the MTRR MSRs are mirrored into APs then
+ * caching is enabled before running the flight plan.
+ *
+ * The MP init has the following properties:
+ * 1. APs are brought up in parallel.
+ * 2. The ordering of cpu number and APIC ids is not deterministic.
+ *    Therefore, one cannot rely on this property or the order of devices in
+ *    the device tree unless the chipset or mainboard know the APIC ids
+ *    a priori.
+ *
+ * mp_init() returns < 0 on error, 0 on success.
+ */
+int mp_init(struct mp_params *params);
+
+/* Probes the CPU device */
+int mp_init_cpu(struct udevice *cpu, void *unused);
+
+#endif /* _X86_MP_H_ */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index 3841593..3ad617c 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -34,8 +34,10 @@
 /* Number of MTRRs supported */
 #define MTRR_COUNT		8
 
-#define NUM_FIXED_RANGES 88
-#define RANGES_PER_FIXED_MTRR 8
+#define NUM_FIXED_MTRRS		11
+#define RANGES_PER_FIXED_MTRR	8
+#define NUM_FIXED_RANGES	(NUM_FIXED_MTRRS * RANGES_PER_FIXED_MTRR)
+
 #define MTRR_FIX_64K_00000_MSR 0x250
 #define MTRR_FIX_16K_80000_MSR 0x258
 #define MTRR_FIX_16K_A0000_MSR 0x259
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 3575d34..7c77b90 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -23,6 +23,9 @@
 
 #define X86_GDT_SIZE		(X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE)
 
+/* Length of the public header on Intel microcode blobs */
+#define UCODE_HEADER_LEN	0x30
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/x86/include/asm/sipi.h b/arch/x86/include/asm/sipi.h
new file mode 100644
index 0000000..25d7d31
--- /dev/null
+++ b/arch/x86/include/asm/sipi.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2015 Gooogle, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_SIPI_H
+#define _ASM_SIPI_H
+
+#define AP_DEFAULT_BASE 0x30000
+#define AP_DEFAULT_SIZE 0x10000
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct sipi_params_16bit - 16-bit SIPI entry-point parameters
+ *
+ * These are set up in the same space as the SIPI 16-bit code so that each AP
+ * can access the parameters when it boots.
+ *
+ * Each of these must be set up for the AP to boot, except @segment which is
+ * set in the assembly code.
+ *
+ * @ap_start:		32-bit SIPI entry point for U-Boot
+ * @segment:		Code segment for U-Boot
+ * @pad:		Padding (not used)
+ * @gdt_limit:		U-Boot GDT limit (X86_GDT_SIZE - 1)
+ * @gdt:		U-Boot GDT (gd->arch.gdt)
+ * @unused:		Not used
+ */
+struct __packed sipi_params_16bit {
+	u32 ap_start;
+	u16 segment;
+	u16 pad;
+	u16 gdt_limit;
+	u32 gdt;
+	u16 unused;
+};
+
+/**
+ * struct sipi_params - 32-bit SIP entry-point parameters
+ *
+ * These are used by the AP init code and must be set up before the APs start.
+ *
+ * The stack area extends down from @stack_top, with @stack_size allocated
+ * for each AP.
+ *
+ * @idt_ptr:		Interrupt descriptor table pointer
+ * @stack_top:		Top of the AP stack area
+ * @stack_size:		Size of each AP's stack
+ * @microcode_lock:	Used to ensure only one AP loads microcode at once
+ *			0xffffffff enables parallel loading.
+ * @microcode_ptr:	Pointer to microcode, or 0 if none
+ * @msr_table_ptr:	Pointer to saved MSRs, a list of struct saved_msr
+ * @msr_count:		Number of saved MSRs
+ * @c_handler:		C function to call once early init is complete
+ * @ap_count:		Shared atomic value to allocate CPU indexes
+ */
+struct sipi_params {
+	u32 idt_ptr;
+	u32 stack_top;
+	u32 stack_size;
+	u32 microcode_lock;
+	u32 microcode_ptr;
+	u32 msr_table_ptr;
+	u32 msr_count;
+	u32 c_handler;
+	atomic_t ap_count;
+};
+
+/* 16-bit AP entry point */
+void ap_start16(void);
+
+/* end of 16-bit code/data, marks the region to be copied to SIP vector */
+void ap_start16_code_end(void);
+
+/* 32-bit AP entry point */
+void ap_start(void);
+
+extern char sipi_params_16bit[];
+extern char sipi_params[];
+
+#endif /* __ASSEMBLER__ */
+
+#endif